Set to remove EGR system BMW 11712248717, 11717792077, 11717804381

Diffuser to be installed instead of the valve EGR BMW.
Plugs for disabling the EGR (AGR) system BMW.
Fitted instead of the valve catalog number OEM BMW – 11712248717, 11717792077 or 11717804381 (length 142 mm)

Some theory about the system EGR.
Exhaust gas recirculation (EGR) is to reduce the exhaust gas of nitrogen oxides by returning part of exhaust gases into the intake manifold.
Return of exhaust gases to the intake manifold reduces the amount of oxygen in the fuel-air mixture and thereby reduce the formation of nitrogen oxides. However, this causes a drop in engine output.
Removing the EGR system results in an increased level of NOx, hydrocarbon separation however, emissions of particulates (soot), carbon monoxide and carbon emissions are significantly reduced. Furthermore, removal of EGR leads to an increase in fuel economy.
Exhaust gas re-fed back into the cylinders in the engine adds causes wear pollutants (soot and tar) and is rapidly oxidized motor oil, which affects the engine life.

Probably many have seen how much “dirt” on the valves of the system can be EGR.

Remove the heat exchanger and thermostat EGR.

Install the plug.

We suppress the exhaust channel in the exhaust manifold.


Instead of the heat exchanger put the cork.

We produce diffusers in strict accordance with the structure of the original valve EGR (AGR).
Including the gradual changes in the internal diameter.
Some manufacturers do not consider this as a result when mounted on the engine, there is a projection which creates unwanted turbulence of the air flow.

After removal of the physical system is also desirable to disable the software.