Aluminum Membrane Caps of breather valve bmw x5 and other 11127552281, 11127548196
A valve membrane cover failure is the main cause of a BMW N52 vent valve crankcase (PCV valve). BMW X5 crankcase vent valve replacement can be pretty expensive in terms of manufacture and assembly. Replacing this PCV valve could cost anywhere between $500 and $600. Most BMW owners usually encounter such cover membrane damages during the dismantling process. Hence, a reliable material is necessary to manufacture this cover membrane, and our company has been able to do so.
We have used aluminum as the source material. Although the malfunctioning of the old cover membranes is not entirely terrible, they can be easily replaced with fresh aluminum cover membranes.
Benefits of Aluminum Caps
- PCV N52 valve as well as BMW N52 CCV and other such models can be easily reused
- The membrane can be replaced without the valve cover being removed
- Heat dissipation of aluminum is excellent
- Extended diaphragm life
- Aluminum cover is not prone to breaking at the time of removal
Installing a new cover
The old cover is attached with a slim glue layer. With a small hammer, this cover must be tapped in a circle. This will cause the layer of glue to crack. Heating the cover slightly will also cause the cover to open up slightly. A flat knife or a screwdriver should be inserted into this gaping hole, and the cover needs to be separated by continuous tapping of the hammer. Once the cover is removed, the new breather valve BMW X5 cover can be installed.
This cover is placed on the neckline and fixed with pins. The pins are twisted to lock the cover. Sealants can also be used to ensure a tight fit. This increases the strength of the BMW N52 intake manifold. This aluminum cap can be reused several times. The Pcv valve n52 and The membrane you can buy also in our online store.
Suitable for BMW engines: n52, n52n, n52t, n52k, n51, n53.