Filter housing DSG 6 of aluminum VAG 02E305045
Aluminum filter housing DSG-6 DQ250 VAG 02E305045
The main reason for failure of the robotic box DSG is overheating.
The designers of the car also note the problem, which in the more recent DSG gearbox on the oil filter housing to wear steel corrugated aluminum, in order to improve heat dissipation.
For the manufacturer, it is a cheap and easy solution.
But really the best solution is to install a fully aluminum body.
Coefficient of heat dissipation aluminum case above, thanks to the aluminum alloy and the ribs on the body.
Improved heat dissipation from the box, thus reducing its operating temperature by 6-8 degrees.
Also aluminum housing reliable native plastic (which need to be changed at every oil change).
The aluminum housing is used to extend the life of the gearbox DSG.
For robotic DSG boxes with wet clutches, the group VAG have two options cases:
– 6-DSG DQ250, cat.num factory building — 02E305045;
– 7-DSG DQ500, cat.num factory building — 0BH325159;
Replacement instructions:
Gearbox oil filter located on top of the gearbox, to change it, ELSA prescribes the removal of the air filter and battery.
1) Slightly loosen when the oil filter housing, to merge the excess oil into the crankcase.
2) Remove the cover completely remove the filter element.
3) Insert the new filter element (preferably wet with oil automatic transmission that has not left level), spin a new aluminum oil filter housing 20-25Nm.
4) Set back the air filter and battery.
Compatible cars for VAG 02E305045 (before buying, make sure that that your vehicle is fitted with CAT DSG-6 DQ250)
Audi
A3 Cabriolet 2008 – 2015
A3/S3/Sportb./Lim./qu 2009 – 2015
Q3 2012 – 2015
TT/TTS Coupe/Roadster 2011 – 2015
SEAT
Alhambra 2011 – 2015
Altea 2004 – 2015
Leon/Leon 4 2011 – 2015
Toledo 2005 – 2009
SKODA
Octavia 2013 – 2015
Yeti 2010 – 2015
VW
Beetle 2012 – 2015
Beetle Cabrio 2013 – 2015
Beetle Convertible 2012 – 2015
Caddy 2004 – 2015
CC 2012 – 2015
Eos 2006 – 2015
Golf Cabriolet 2012 – 2015
Golf Plus 2005 – 2014
Golf Sportsvan 2014 – 2015
Golf Variant 2010 – 2014
Golf/R32/GTI/Rabbit 2004 – 2013
Golf/Variant/4Motion 2003 – 2015
Jetta 2011 – 2015
Jetta/syncro 2011 – 2014
Passat 2006 – 2015
Passat CC 2009 – 2012
Passat/4Motion/Santana 2006 – 2015
Scirocco 2009 – 2015
Sharan/syncro/4Motion 2011 – 2015
Tiguan 2012 – 2015
Touran 2003 – 2015
Aluminum body filter dsg 6
To date, a robotic gearbox DSG-6 there is a “disease” it overheat.
In the result box are easily damaged.
The reason for all the overheating of the box.
The designers of the concern VAG invented aluminum corrugation, which were installed in the plastic shell for better heat sink, it is certainly
improved the box, but not freed from problems until the end.
For a manufacturer such decision was the budget option.
Regular dsg-6 the oil filter housing is made of plastic, but it removes heat from the box.
Also quite often regular filter housing dsg 6 (catalog number 02e305045) is damaged when removing or in the process of operation that leads to leakage of the oil from the filter housing dq250.
You can of course with filter change for dsg 6 leave the plastic case.
But we offer the best solution to replace plastic filter housing for DSG 6 case is made entirely of aluminum.
This alloy is reliable, it is definitely stronger than plastic, so it will not need to change every time you change the oil filter.
And most importantly, thanks to a good heat sink properties of this material and additional fins aluminum shell has the best heat transfer!
Advantages of aluminum case dsg:
— Reduces the temperature of the oil in the box 6-8 degrees;
— Longer retains the properties of the oil and filter dsg;
— Increases the service life of the transmission;
— Aluminum is more durable and reliable plastic, it is durable and can be used for a long time;
This flask filter dsg has already supplied many of our customers and satisfied.
Before buying you must ensure that Your vehicle is equipped with transmission DSG 6 DQ250.