https://www.amazon.com/dp/B016GPDCL6
Cover Valve Porsche Cayenne Membrane
94810513107 Porsche Cayenne m48 v8 450PS
94810513204, 94810513206, 94810513207
new diaphragm valve for crankcase ventilation.
producer sells only cover entirely.
we produce membrane separately!
replacement is very easy, you need to remove the valve cover by prying it with a screwdriver.
remove the old and install the new membrane.
close the cover.
savings of more than $600
The Cayenne valve membrane of the valve of ventilation
Often, the owners of Porsche Cayenne cars are faced with the problem of the vent valve cayenne, with age, the valve cayenne, which is located in the valve cover 94810513107 fails because of a leaky membrane.
The car services the car owner offered to change valve cover Assembly cost about 20tr. However, it is possible to solve this problem faster and cheaper.
Enough to buy and change the diaphragm valve Cayenne separately!
Why bother repairing a vent valve?
The importance of replacing the membrane valve Cayenne, due to the fact that through the torn membrane entering the engine unaccounted for air.
In the end, the engine is not exactly a bad start, there are shortages in the ignition, as the engine gets contaminated by dust, which causes wear and tear on parts and mechanisms.
If the area of the vent valve is heard whistling, then the need to replace the membrane valve Kaen.
Instruction:
Remove the trim motor.
Remove the breather cover, gently podavaite flat head screwdriver (it is recommended to warm the clips with a hair dryer).
Replace the membrane (don’t forget to swap the plastic jamb and install spring).
Snap on the cover.
During the first startup after replacing the membrane, the engine may not sustainable (due to the fact that earlier it was air leak).
Have run the car a few moments and then restarted the car.